MBM Corporation ES 5000 - Manual (Page 14)

14
1.3) Press Unit Jam
Fully extend the Folding Unit to the
direction of the red arrow in the picture on
the right
Use the Jam Removal Tool to rotate the
rollers by placing the tool into the jam
Removal holes as shown in the picture on
the right
Turn it downward. Remove the jam as
shown in the picture on the right
Tips: Correct any mis-folds and run the
form through the manual feed (please refer
to Chapter 4-6 for the details of the
manual feed)
1.4) Out Feed Jam
In the event of jam in the Out-feed, the
display blinks
Push down the lower plate (with the
rollers) and remove the jam as shown in
the picture on the right.
Pressure Sealer ES-5000