MBM Corporation LJ 3000 - Manual (Page 2)

LJ3000 Air Jogger
OPERATING INSTRUCTIONS
1. Place LJ3000 On Stable Heavy Duty Table.
2. Attach Power Cord Onto Back Of Unit And
Plug Cord Into 115 Volt AC Service.
3. Place Paper Into Jogging Bin.
4. Toggle Green On/Off Switch On Front Of
Unit To Start Jogger.
5. Adjust Vibration Control Dial To Increase Or
Decrease Vibration Based On Paper Stock.
6. Guide Paper Stock With Your Hands As
Needed To Jog Stray Pieces Of Paper Stock.
7. Remove Jogged Paper Stock When Done.
8. Turn Off Unit When All Paper Stock Has
Been Jogged.