MBM Corporation Maxxum 91 corner stapler - Manual (Page 8)

Corner Stapler Model 91 Operator Manual
T10125 September 2001
1. Open plastic cover and press the Input housing latch to the
right to reset the missing staple indication.
2. Insert a sheet in the stapler and press the manual operation
button to verify that the sheet will be stapled.
3. Remove the cartridge and, if it is empty, replace it with a new
one according to the maintenance procedure 5.1.
4. If the staple cartridge is not emtpy, tear off 25 mm of staples,
insert the cartridge and press the manual operation button
2-5 times until stapling resume.
4.3 Job recovery after misfeed in collator
4-2