Maytag MTUC7500ADM Dimension Guide - Manual

Compactor
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
CUSTOM PANELS
CLEARANCE DIMENSIONS
MTUC7000AW MTUC7500AD
This compactor is for use on a single phase,
115-volt, 60 Hz, AC only, 15- or 20-amp fused and
properly grounded circuit and is equipped with a
grounding plug as shown below. It is recommended
that a separate circuit serving only this appliance be
provided.
18" min.
(45.7 cm)
24" min.
(61 cm)
A
15 min.
(38.7 cm)
34 " min.
(87 cm)
3" min.
(7.6 cm)
"
A
B
34 1 ⁄
8
"
(86.7 cm)
24"
(61 cm)
15"
(38.1 cm)
29 ³⁄₈ "
(74.6 cm)
15"
(38.1 cm)
25"
(63.5 cm)
15"
(38.1 cm)
Models with handles Models without handles
23 ¹³⁄₁₆"
(60.5 cm)
15"
(38.1 cm)
15"
(38.1 cm)
25"
(63.5 cm)
1. Grounded electrical
outlet must be a
minimum of 3" (7.6 cm)
away from surrounding
cabinets or nearby walls
as shown. It can be
placed either to the left
or the right side of the
product.
Panel should be ¹⁄₂" (13 mm)
min. thickness
1. Leave 6" (15.2 cm) of clearance
space to the right side of the
compactor in order to remove
the compactor bags.
2. Leave 23" (58.4 cm) of
clearance in front of the
compactor in order to fully open
or remove the compactor
drawer.
Panel should be ¹⁄₂" to ⁵⁄₈"
(13 to 16 mm) thick.
NOTE: A thicker panel may
need rounded front corners
and a cutout for access to
the handle.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice. W10190314-D-MT
5/5/2014
Without Trim Kit