Marantz MT8600 - Manual (Page 4)

MOUNT MT8600 PROJECTOR MOUNT INSTALLATION INSTRUCTIONS continued
Step 3
Step 2 B
Step 3 B
Figure 3
Figure 4 Figure 6
Figure 5
Step 4
Wire
Access
Wire
Access
1
1
2
2
2 2
2 2
2
2
2
2
1
2
Plate 3 Plate 4
Plates 1 & 2 Plate 3
Horizontal Adjustment Plate 2 (Figure 2) attached to
Projector Mount Ceiling Plate 1.
Horizontal Tilting Plate 3 Projector Mounting Plate 4
Install the combined plates (above) securely to the ceiling
structure in accordance with local commercial building
standards.
Use suitable hardware in adequate quantity and size depending
on the installation requirements. (Please note that Projector
VP8600 weighs 31.1 lbs. (14.1 kgs).
Attach Horizontal Tilting Plate 3 to the previously combined
plates (already installed on ceiling) using the 1/4in. screws
provided, as indicated in Figure 4. Install two (2) 1/4in.
screws with metal washers into the welded metal studs
(indicated #1).
Holes for 1/4” screws
Holes for 1/4” screws with steel washer
Indicates Forward
Positioning of Mount
Tilting Capability Tilting Capability
Horizontal Tilting Plate 3 Attached to Plates 1 and 2.
The newly combined Plate 3 provides 10 0 degrees of
horizontal tilt. When positioned, tighten with screws
provided.
continued over
Invert the projector and place it on a soft and flat
surface. Align the four (4) flat washers provided
with the four (4) 1/4in. mounting holes on the
projector and secure with four (4) 1/4in. screws
provided.
mounting holes