Dixon Grizzly 18134-1004 - Manual (Page 17)

SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
GRIZZLY™
CHASSIS: 11 GA - rectangular tube
SEAT: Big Rig™ Seat Suspension System Designed for operator
comfort by use of high-density closed cell foam padded back and
arm rests, upholstered with Cordura
TM water-repellent fabric.
Seat is adjustable fore and aft. Mounted on operator suspension
system.
MOWER DECK: Made of 11 GA fabricated welded construction with external
reinforcement ribs. Three blades combine for either a 50” or
60” cut width. Cut height approximately 1.5” to 5” via 8 position
lift handle.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a Parker 10cc pump
and TJ230 wheel motor.
ENGINE: Each mower is powered with either a 23HP Kohler, 24HP
Honda, or a 25HP Kohler twin cylinder engine, overhead valve, air
cooled, gasoline, full pressure lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking
brake and blade drive clutch.
TIRES: Front 13x5x6 smooth tread (16-21 lbs)
Rear 24x12x12 Turf Master (8-14 lbs)
CAPACITIES: Fuel - 11 gallon (approximate)
Hydrostat Fluid tank - 4 qt w/in-line 25 micron filter &
Dixon Blue™ 15W50 Synthetic Hydrostatic Fluid
Engine - 2 qts. SAE 10W30 oil (with filter)
DIMENSIONS: Width 50” outside rear wheel measurement
Height 48” to top edge of seat
Length 77” hitch tab to front
Weight 816 lbs. (50”) 878 lbs. (60”)