Maintenance – Dukane 8762 User Manual

Page 56

3. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling

condition. The two screws are not removable.

Remove the lamp housing by holding it.

6. Maintenance

NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.

4. Push the part labeled “PUSH” and insert a new lamp housing until the lamp housing is plugged into the

socket.

CAUTION

Do not use a lamp other than the Dukane replacement lamp.
Order this from you dealer.

Secure it in place with the two screws.

Be sure to tighten the screws.

5. Reattach the lamp cover.

6. Tighten the lamp cover screw.

Be sure to tighten the screw.

PUS

PUSH

PUS

PUSH

Interlock