DeLonghi KF8110J - Manual (Page 7)

7
Living innovation
Blender
KF8110J
the terminal in the plug which is marked with the letter E or by the
earth symbol or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
When wiring the plug, ensure that all strands of wire are securely
retained in each terminal. Do not forget to tighten the mains lead
clamp on the plug. If your electricity supply point has only two pin
socket outlets, or if you are in doubt, consult a qualified electrician.
Should the mains lead ever require replacement, it is essential that this
operation be carried out by a qualified electrician and should only be
replaced with a flexible cord of the same size.
If the plug is a moulded-on type the fuse cover must be refitted. If the
fuse cover is lost, the plug must not be used until a replacement cover
is obtained.The colour of the correct replacement fuse cover is that of
the coloured insert in the base of the fuse recess or elsewhere on the
plug.Always state this colour when ordering a replacement fuse cover.
Only 13amp replacement fuses which are asta approved to B.S. 1362
should be fitted.
Service and Customer Care
• If the cord is damaged it must, for safety reasons, be replaced by
DELONGHI or an authorised DELONGHI repairer.
UK
If you need help with:
• using your kettle
• servicing or repairs (in or out of guarantee)
ట call DeLonghi Customer Care on 023 9239 2333. Have your model
number ready - it is located on the underside of your kettle.
• spares and attachments
ట call 0870 4296438.
MANHATTAN_DeLonghi.qxp 8-05-2006 17:10 Pagina 7