Luminox A.9052 User Manual
Page 12
TIME 2 (Second time zone) (Setting)/
タイム2:(セカンドタイムゾーン)設定
To adjust time zone 2, use same procedure as for TIME 1
Use same procedure as for Chrono; Start A. Press
A to stop, then C to show speed. (Example: Drive
exactly 1 km and calculate speed by measuring
elapsed time. Or calculate speed of one racing
round, etc) To reset to zero, press first A again to
stop then B. (Some message of errors can appear
if result value is too high)
Tachometer mode (Speed measurement in km/h or MPH)
Change km/h -- MPH:
Press B for more the 1 second, then adjunst to
km/h or MPH by pressing A, than confirm with B.
TIME 3: To adjust time zone 3, use same procedure as for TIME 1
Minutes are synchronised with TIME1. Seconds are the same as TIME1 and cannot be changed.
Change between TIME 1 and TIME 2
Push A and B together to switch between TIME1 and TIME2.
TIME 2 (Second time zone) (Setting)/
タイム2:(セカンドタイムゾーン)設定
To adjust time zone 2, use same procedure as for TIME 1
Use same procedure as for Chrono; Start A. Press
A to stop, then C to show speed. (Example: Drive
exactly 1 km and calculate speed by measuring
elapsed time. Or calculate speed of one racing
round, etc) To reset to zero, press first A again to
stop then B. (Some message of errors can appear
if result value is too high)
Tachometer mode (Speed measurement in km/h or MPH)
Change km/h -- MPH:
Press B for more the 1 second, then adjunst to
km/h or MPH by pressing A, than confirm with B.
TIME 3: To adjust time zone 3, use same procedure as for TIME 1
Minutes are synchronised with TIME1. Seconds are the same as TIME1 and cannot be changed.
Change between TIME 1 and TIME 2
Push A and B together to switch between TIME1 and TIME2.
Tachymeter mode
Press B for more than 1 second, then adjust to km/h or
MPH by pressing A, than confirm with B.