Lumens Technology CT-I30 User Manual
Ct-i30 installation guide, Important, Accessories

Put hand screw
through the
horizonital
metal plate
Acomplished
Assembled the
grommet set
between both sides
of the table hole
Remove the
waterproof cover
then put the rubber
Use the tool
to lock arm
*
When the base and arm joints are loose, use the long side of tool
to lock arm.
Body
Tool
Tool
Cable
Management
Rubber
Base
x1
x1
x1
x1
x2
x2
Key
x1
x1
EVA
Important
*
Please activate your warranty at
www.MyLumens.com/reg
*
To ensure successful installation, please be sure to follow each
of the following steps.
*
To download the latest version of Quick Start Guide, multilingual
user manual, software, or driver, etc., please visit Lumens
TM
http://www.Mylumens.com/support.php
www.MyLumens.com
1. Accessories
CT-I30 Installation Guide
2. Arms Installation
3. Pad Installation
Caution: Claws can only be adjusted in “unlock” position do not try to adjust the claws in “lock” position.
Use key to unlock the security lock
Unlock the claw lock
Pull out each fixed claw to extend position
Place pad product
Push the claws toward PAD to be fixed and locked
by switch, then press the knob in the security
lock position
Additional EVA cushion available
in the package for thinner devices
Paste EVA cushion to the
indicated position on the holder