Lumens Technology VC200 - Manual (Page 26)

English - 26
Chapter 6 Descriptions of major functions
6.1 I would like to switch to VC200
1. Press [Camera 1 ~ 3] on the Remote Control to select VC200.
 Camera 1 ~ 3 is selected with IR SELECT.
6.2 I would like to save the current lens position data
1. Press [Preset + ID] on the Remote Control to save the current position
data.
 ID shall be a digit [0 ~ 99].
6.3 I would like to clear the saved position data
1. Press [Reset + ID] on the Remote Control to clear the given position
data.
 ID shall be a digit [0 ~ 99].
6.4 I would like to turn on the back light compensation
function
1. Press [Back Light] on the Remote Control to turn on or turn off the
back light compensation
6.5 I would like to adjust the shooting angle of the lens
1. Press [Tilt ] or [Tilt ] on the Remote Control to adjust the angle
upward or downward.
2. Press [Pan ] or [Pan ] on the Remote Control to adjust the angle to
right or left.
3. Press [Pan - Tilt Reset] on the Remote Control to reset the angle to
the center point.
6.6 I would like to zoom in/out images (ZOOM)
6.6.1 Adjust image size
1. Press [Fast +] on the Remote Control to zoom in images.
2. Press [Fast -] on the Remote Control to zoom out images.
6.6.2 Fine tune image size
1. Press [Slow +] on the Remote Control to zoom in images.