9 i would like to set the image mode, 10 i would like to freeze images, 11 i would like to rotate the image – Lumens Technology VC-B20DU User Manual
Page 26: 12 i would like to change the camera direction, 13 i would like to display the current status, I would like to set the image mode, I would like to freeze images, I would like to rotate the image, I would like to change the camera direction, I would like to display the current status
English - 25
The focus speed upon triggering AF Sensitivity
[Normal] (default): Image flickering may not occur
[Fast]: Fast focus speed
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [] or [] to select [AF Speed].
5. Press [ENTER] to activate.
6. Press [] or [] to select [Fast / Normal].
7. Press [MENU] to exit.
6.9 I would like to set the image mode
1. Press [Picture] on the remote control to switch [Off / Neg / B&W].
6.10 I would like to freeze images
1. Press [Freeze] on the remote control to freeze the current image on
the display.
6.11 I would like to rotate the image
1. Press [Mirror] on the remote control to switch [Off / Mirror / Filp /
Filp+Miorror].
6.12 I would like to change the camera direction
1. Press [L/R Direction Set] on the remote control to switch [L/R
Direction / Normal].
6.13 I would like to display the current status
1. Press [Info] on the remote control to display the current status
information.