Lumens Technology DC260 Quick Start - Manual (Page 11)

English - 10
6.
Start Using the DC260
6.1 Turn on the DC260
Control Panel Remote Control
z
When using the remote control, aim at the receptor on the DC260,
and press the power button.
z Once DC260 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
Once the password page is shown, please key in the
password. If you forget it, please contact your distributor or the
service center.
*For detailed menu function introduction and operation instructions, please refer
to the user manual.