Mounting the dc210 at desktop, Connecting devices – Lumens Technology DC210 Quick Start User Manual

Page 4

English -

3. Mounting the DC210 at Desktop

1. Please set up the DIP Switch settings first. Refer to

Chapter 5 DIP Switch

Settings in the DC210 user manual

2. Please refer to the

Base Installation Guide

for installation instructions for

all parts.

4. Connecting Devices

4.1 Step 1: Plugging in the Power Outlet

: Appearance of power cord may vary with countries/regions.

4.2 Step 2: Connecting Peripherals

4.2.1 Connecting Projector

Use VGA cable to connect VGA OUTconnector on DC210 to a projector or

the VGA IN connector on a monitor.

4.2.2 Connecting Monitor

Use VGA cable to connect VGA PASSTHROUGH connector on DC210 to

the VGA IN connector on a monitor.

[Note] The VGA PASSTHROUGH connector
only outputs VGA IN signals.

AC Outlet