Lumens Technology DC210 - Manual (Page 12)

4.2 Mounting the DC210 at Desktop
1. Please set up the DIP Switch settings first. Refer to Chapter 5 DIP
Switch Settings in the DC210 user manual.
2. Please refer to the Base Installation Guide for installation instructions
for all parts.
4.3 Connecting with components
4.3.1 Step 1: Plugging in the Power Outlet
: Appearance of power cord may vary with countries /
regions
AC Outlet
4.3.2 Step 2: Connecting with components
¾ Connecting to a projector
z Use VGA cable to connect VGA OUT connector on DC210 to a projector
or the VGA IN connector on a monitor.
English - 11
¾ Connecting to a monitor
z Use VGA cable to connect VGA PASSTHROUGH connector on DC210
to the VGA IN connector on a monitor.
[Note] The TO VGA PASSTHROUGH connector only outputs VGA IN
signals.