View input, Channels menu – LSC Lighting Redback Wallmount Operators Manual User Manual
Page 29

Redback Wallmount Dimmer
Menu System
Operator Manual V1.3
Page 25
4.8.4 View Input
The “DMX Setup” menu allows you to view the channel levels on the DMX input. Press
[View Input]
Press either [>] or [>] to scroll through all slots in the DMX Universe.
4.9 CHANNELS MENU
Selecting [Config] [Channels] provides menus for configuring the following parameters for
each channel:
Min. Minimum Level
Max. Maximum Level
Curve. Diming or Non Diming.
Source. The control source for the channel. The choices are: DMX only, Memory only,
Auto Switch (between Memory and DMX whenever DMX is present) and Auto Power
(On at full whenever DMX is present).
The screen shows the settings for the first 6 channels. Use the [<] or [>] buttons to see the
other groups of 6 channels (if fitted). The navigator in the top right of the screen shows the
selected group highlighted.
Each channel button shows the settings for that channel.
DMX Address
Channel Output
Number
Control Source
Navigator shows
current group of 6
selected channels
highlighted