LSC Lighting EKO Installation - Manual (Page 3)

EKO Installations
Our Ref:
p:\eko\consultant specs\eko installation photo concepts v1.1.doc
Page 3 of 8
QTQ 9 Brisbane
As Installed Installation Frames
8 x EKO 524/R
24 x 20A channels with RCD on the input to each group of 12 channels
3 x EKO 612/R
6 x 25A channels with RCD on the input to each group of 12 channels
This EKO dimmer installation shows a new dimmer installation to QTQ 9.
o EKO installation frames were surface mounted to the new wall surfaces.
o Cabling was brought through apertures, tested and terminated.
o The electronics cabinets were hung, mains inputs and data cabling terminated and the
dimmers configured and commissioned using the front panel touch screens menus.