Important parts of your ifill oxygen cylinder – DeVilbiss IFILL PD1000A User Manual

Page 7

A-535-CYL

E N G L I S H

I M P O R TA N T PA R T S

IMPORTANT PARTS OF YOUR IFILL OXYGEN CYLINDER

(on rear)

PD1000A series

535-CF series

9 (on top)

PD1000 SERIES

1. Cannula Fitting– Use this fitting to attach the cannula to

your iFill cylinder.

2. Rotary Selector– Use this to select your prescription set-

ting.

3. Oxygen Fill Connection – Use this connection to attach the

cylinder to the DeVilbiss iFill Personal Oxygen Station.
NOTE–Your iFill oxygen cylinder can only be filled with the
DeVilbiss iFill Personal Oxygen Station.

4. Oxygen Contents Gauge– Indicates the remaining pressure

in the oxygen cylinder. When this gauge falls into the red
section, you should switch to a new cylinder.

5. Hydrostatic Test Date - Contact your homecare provider

or the cylinder manufacturer for details.

6. High-Pressure Oxygen Cylinder – Portable oxygen delivery

tank.

7. • PulseDose Indicator– Either green or red light illuminates

each time the unit pulses oxygen.

• Normal Battery Indicator– A flashing green light indicates

that there is sufficient battery power.

8. • Low Battery Indicator– A flashing red light indicates that

there are 4 - 8 hours of battery life remaining. The low
battery indication time may be reduced when using
NiMH batteries.

• Change Battery Indicator– A constant red light indicates

that the battery should be changed immediately. Unit can
be used only in continuous flow mode until new batter-
ies are installed.

9. Battery Door– Use only a standard “AA” Alkaline or NiMH

batteries.

535-CF SERIES