Bodypack transmitter, Bodypack mini-xlr pin assignment – LD Systems WS 1000 G2 User Manual
Page 13

13
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
11
BODYPACK TRANSMITTER:
9
INPUT
3-pin mini XLR input for the supplied microphone
or guitar cable.
10
GAIN SWITCH
Select the appropriate gain setting.
MIC = microphone
0dB = guitar with passive pickup
-10dB = guitar with active pickup
If the audio signal overloads the receiver, switch
the gain to the next lower setting.
11
BELT CLIP
Attach the bodypack to a belt or guitar strap as
shown below.
9
10
1
2
3
MINI-XLR
sleeve
tip
6,3 mm jack
1
2
3
MINI-XLR
Headset, lavalier or wind instrument microphone
Guitar & Bass and other high impendance sources
1
2
3
MINI-XLR
R
2,2k
Headset, lavalier or wind instrument microphone with low output. 2,2 kOhm resis-
tor soldered on pin 2 and pin 3 increases gain.
BODYPACK MINI-XLR PIN ASSIGNMENT