Connection & operating elements – LD Systems DAVE 8 XS User Manual
Page 6
6
7
CONNECTION & OPERATING ELEMENTS:
1
MAIN LEVEL ADJUST
Preset of the main level of the system - subwoofer
will be adjusted too, corresponding the preset of
the SUB LEVEL.
2
SUB PHASE
Phase invertation switch to invert the Phase of
the Subwoofer (0° / 180°) if necessary due to an
difficult installation.
3
SUB LEVEL ADJUST
Preset subwoofer level proportionally to the satel-
lite level. We recommend at the standard setting
12:00 o’clock level.
4
INPUT RCA (LEFT / RIGHT)
Asymmetrical Line Input for RCA jack
5
INPUT XLR / 6.3 MM PHONE JACK
(LEFT / RIGHT)
Symmetrical Line Input for XLR / Jack 6.3 mm
(combo).
6
SPEAKER OUTPUT (LEFT / RIGHT)
Speakon® compatible speaker output. Minimum
impedance speaker 4 ohms. Used pins are: 1+ / 1-.
7
POWER SWITCH
ON / OFF switch. Please switch connected devices
to ONfirst and to OFF after switching the system.
8
POWER CONNECTION SEAT
Power connection seat 240 V (IEC power connector)
and fuse seat. Replacement of fuse only if power
connection is disconnected. If fuse blows repeated-
ly please contact authorized personel for servicing.
1
2
3
4
5
6
8
7
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI