Lacava 1900 - Manual (Page 5)

LACAVA LLC
®
Page 5 of 11
3. From below the mounting
surface, slide the black rubber
washer (8) and metal washer (9)
onto the threaded mounting
post of the mixer body (4).
4. Then tighten the locking nut (10)
onto the mounting post so that
the mixer body (4) is secured
tightly to the mounting surface.
The two small screws can be
tightened if there is not room for
the locking nut to go the way up
to the mounting surface.
5. Remove the plug and locking
nut (14) from the end of the
flexible hose (3) and then slide
the hose down through the mixer
body (4).
6. From below the mounting
surface, place the hose (3)
through one of the larger holes
of the white plastic guide (12).