Lacava 1850 - Manual (Page 5)

LACAVA LLC 5
8. Reinstall plaster guards and finish wall around the guards.
9. Slide the backplate (A) into place over the cartridge body and diverter stem. Use silicone to seal the plate to the
finished wall.
10. Thread the diverter knob (B) onto the diverter stem.
11. Loosen the set screw in the control handle (C) and slide onto the cartridge stem. Tighten the set screw using the
provided wrench and press the cap cover into the screw hole.
6. Remove plaster guards and outlet caps. Make sure to have containers set up under the outlets to catch water.
7. Turn water supply on and turn cartridge stem counter clock-wise to open valve. Flush water through default outlet.
Then pull diverter knob and flush diverted outlet.
Installation Instructions/Instrucciones de Instalación
A
B
C