Lacava 1820 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Remove the locking nut and rubber washer from the
mounting post.
2. Place mix er body through the faucet hole of the mounting
surface.
3. From below the mounting surface slide the rubber
washer and metal washer onto the mounting post.
4. Thread the locking nut onto the mounting post by hand
until tight, and then turn an additional ¼ turn using a
wrench. Be careful not to over-tighten the nut, as this
may cause damage to the mounting surface.