Lacava 225 - Manual (Page 5)

LACAVA LLC 5
8. Adjust cartridge to provide desired temperature range. Turn water supply on. Turn cartridge stem until preferred
temperature is reached. This will be the temperature when the handle is vertical.
9. Position the stop ring so that valve will operate in desired temperature range. Slide stop ring over the cartridge
stem onto teeth.
10. Now insert trim ring assembly through the backplate then thread onto the rough valve until backplate is seated
against the finished wall.
11. Slide handle onto cartridge stem and push until it snaps into place.
STOP
RING
BACKPLATE
TRIM RING
ASSEMBLY
HANDLE