Lacava llc 4 – Lacava 13012 User Manual

Page 4

LACAVA LLC

Installation Instructions/Instrucciones de Instalación

1. Position the rough-in into the wall at the appropriate

distance. Make sure the rough-in is leveled horizontally

and vertically.

2. Secure rough-in using the mounting holes on the

backplate.

3. Finish the wall around the plaster guards (Each hole

should be a circle with a max. diameter of 2 1/8”).

4. Remove the plaster guards.

5. Insert the spout into the tap body and fasten with

screws.

6. Slide escutcheon over the spout and the control

handle.

Min. distance for tile

wall

Min. distance for

plastered walls

Max. distance for

finished covering

2 1/8”