Lacava 1542 - Manual (Page 5)

LACAVA LLC 5
7. Install trim:
a.) First install brass extension and secure into place with
screw.
b.) Apply a bead of silicone sealant onto the back edge of
the backplate (2) and slide into place over the cartridge
body, making sure the rubber washer sits in between the
wall and backplate. Using a clean rag, wipe off any
excess silicone.
c.) Lastly, thread handle (3) onto rough-in.
8. Turn on the water supply and check for any leaks.
3
2
Installation Instructions/Instrucciones de Instalación