Lacava 1593 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Place the cartridge bodies up through their designated
holes. Then place a handle base onto each extension
and thread onto the brass body.
2. Tighten each locking nut upwards as far as possible so
that both handle bases are secure. Make sure not to
overtighten, as this can potentially cause damange to the
mounting surface.
3. Push a lever handle into each handle base, over the
cartridge extension.
4. Then tighten both set screws, with the provided Allen
wrench, until both handles are secure.
Back
Back