Lacava 1584L - Manual (Page 5)

LACAVA LLC 5
7. Slide the spout through the spout escucheon.
8. Wrap the spout threads with Teflon tape then tighten
the spout into the rough-in by hand.
9. Slide the escucheon back until it butts up to the finished
wall. If desired apply a small bead of silicone to the back
edge of the escucheon to secure to wall.
10. Slide each handle base through its escucheon. Make
sure the black rubber o-ring is installed in the back
of each esctucheon.
11. Tighten a handle onto each cartridge extension. Before
the handle bases are completely tight, the handles can
be adjusted so that they are orientated in the desired
position.
12. Slide each handle escutcheon back until it is seated
against the wall.
13. If desired, place a small bead of silicone around outside
edge of each escutcheon.
14. Turn on the water supply and check for any leaks.