Lacava 0621 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Remove the lock nut, steel washer, and rubber washer
from the mounting post.
2. Place mixer body with its escutcheon ring and o-ring
still attached through the faucet hole of the mounting
surface.
3. From below the mounting surface, slide the rubber
washer then metal washer onto the mounting post.
4. Thread the locking nut onto the mounting post by hand
until tight, and then turn an additional ¼ turn using a
wrench (DO NOT OVERTIGHTEN! avoid damage to
mounting surface).
5. Connect supply lines, turn water on, and check for leaks.