Lacava 2832 - Manual (Page 4)

LACAVA LLC 4
Installation Instructions/Instrucciones de Instalación
1. Place the cartridge bodies up through their designated
holes. Then place a handle onto each extension and
thread onto the brass body.
2. Tighten each locking nut upwards as far as possible by
hand until tight. If the nuts do not fit all the way up to
the mounting surface then tighten the six screws until the
handles are secure. Be careful not to overtighten the
nuts, as this may cause damage to the mounting surface.
3. Remove all of the mounting hardware from the spout
mounting post and shower socket.