La Crosse Technology K84377 - Manual

IN/OUT Window Thermometer
Model K84377 | Instruction Manual
Features
• Easily read the current outdoor temperature from inside your home
• Maximum and Minimum temperature with auto reset (ºF)
• Weather resistant--can be used indoors or outdoors
• Demountable for window cleaning
Setup
1. Remove the mounting holder and transparent cover from the LCD.
2. Hold the white grips on the side of the LCD and carefully remove it
from the white case.
Note: Do not touch the LCD directly.
3. Remove the plastic safety strip, preventing the battery from making
contact. Insert the LR44 button cell battery with the + side facing up.
4. Remove the protective scratch guard from the LCD.
5. Set time and date (see program menu).
6. Slide the IN/OUT switch to select indoor or outdoor use.
7. Carefully put the LCD back into the white case (circuit board will face
the back, buttons will face the front).
8. Replace the transparent cover over the LCD. Press firmly to secure it
to the white case.
LCD Readings
Current Temperature: The upper LCD shows the current temperature in
large numbers.
MAX/MIN Readings: The lower LCD shows the maximum and minimum
temperature for the past 24 hours.
• The minimum temperature automatically resets at 8:00 P.M.
• The maximum temperature automatically resets at 8:00 A.M.
• If the time is not set, the minimum and maximum temperatures will not
be reset at the correct local time or may read dashes (---).
Program Menu
1. Remove the mounting holder and transparent cover from the LCD.
2. Hold the white grips on the side of the LCD and carefully remove it
from the white case.
Note: Do not touch the LCD directly.
3. Hold the MODE button until the hours flash. Press and release the +
button to adjust the hours.
4. Press and release the MODE button and the minutes will flash. Press
and release the + button to adjust the minutes. Press the MODE button
to return to the temperature display.
Mounting
Indoor Use:
1. Remove the window thermometer from the mounting holder.
2. Clean and dry the area you choose to mount the window thermometer
so the adhesive will stick.
3. Remove the thin cover from the adhesive to reveal the sticky side.
4. Carefully place the mounting holder in the desired location with the
opening facing up.
5. Insert the window thermometer.
Outdoor Use:
1. Choose and outdoor window location that is fairly dry and shaded for
accurate readings.
2. Remove the window thermometer from the mounting holder.
3. Clean and dry the area you choose to mount the window thermometer
so the adhesive will stick.
4. Remove the thin cover from the adhesive to reveal the sticky side.
5. Carefully place the mounting holder in the desired location with the
opening facing up.
6. Insert the window thermometer.
Mounting Holder
LCD
Transparent Cover
White Grips
Battery Holder
Temperature Sensor
White Case
Adhesive for mounting