Maintenance and repair, Cleaning, Wear parts – Koga NuVinciHarmony - E-Nova NuVinci User Manual
Page 9: Lubrication, Repair work, Additional information

9
EN
Cleaning
Your NuVinci Optimized components
are sealed and well protected from the
external environment. However, do not
use water under pressure (such as pres-
sure washers or water jets) for cleaning
to prevent malfunctions due to water
penetration.
During the winter, you should clean
your bicycle in shorter intervals so
that winter road salt cannot cause
any damage.
Do not use aggresive cleaners.
Wear Parts
Handlebar grips, sprockets and bike
chains are wear parts. Please check
these parts regularly and replace them
as necessary.
Lubrication
The NuVinci Optimized CVP is provided
with permanent lubrication and the
CVP internals are maintenance-free
for the life of the product.
The NuVinci Optimized CVP internal
freewheelmechanism is serviceable.
Regular lubrication will extend the
chain’s service life.
Repair Work
Only a qualified bike dealer should
perform any necessary work on the
N360, Harmony or Harmony
H|Sync systems.
Unauthorized work on your N360,
Harmony or Harmony H|Sync system
could endanger you, and your
warranty may become void.
Please contact your qualified bike
dealer regarding any questions or
problem you may have.
Additional Information
Refer to our website for additional
service information at
www.nuvinci.com
Maintenance and Repair