Kiddy adventure pack - Manual (Page 10)

ENG
3.6 Adjusting the width of the child seat
The width of the child seat is adjustable and can be adjusted by the two side
straps.
Always make sure that the child cannot slip through the side
openings when being carried!
To adjust the width, tighten (Fig. 6, No. 1.) or loosen (Fig. 6, No. 2), the two
straps in the adjusters.
4. Securing the child
4.1 Opening and closing the belt system
Always fold out the stand when you are not carrying the ‘kiddy
adventure pack’.
Always use the belt system as prescribed when you carry your child
in the ‘kiddy adventure pack’.
To release the harness, press the buckle button (Fig. 7. No. 1) and remove
the belt tongues from the buckle (Fig. 7, No. 2).
To secure the harness, push the belt tongues into the buckle.
Make sure that the buckle is properly clipped in, and that the belts are
optimally adjusted and not twisted.
4.2 Adjusting the belt system
The shoulder straps and lap belt can be adjusted by moving the respective
belt adjuster according to the size of your child. Slide the belt adjuster in the
respective direction to adjust the length of the belt system (Fig. 8).
7