Dixon 539130211 - Manual (Page 6)

8
ASSEMBLY
10. Lift Clamshell assembly onto (539 114781)
Mount Bracket, Lower. Position tubes on
bottom of clamshell on out side of the tubes
on (539 114781) Mount Bracket, Lower.
11. Secure with (539 119372) Hinge Pin and (539
115501) Cotter Pin.
12. Hook both (539 114783) Linkage, Support
into (539 114786) Plate, Support, Linkage
and secure with two remaining (539 115501)
Cotter Pins.
13. Tighten (539 100476) 5/8 Jam nut and (539
115591) 5/8 Nyloc nut so that the clamshell
is sitting straight on unit.
14. Tighten (539 114782) Brackets on front of
clamshell.
539 114782
BRACKET
CLAMSHELL
ASSEMBLY
539 114812 LINKAGE,
SUPPORT
FIGURE 3