Kleenmaid DW18I - Manual (Page 13)

• 13 •
INSTRUCTIONS FOR CLEANING AND MAINTENANCE
• Your dishwasher comes with a self-cleaning
pulse filter that constantly filters small
particles of dirt trapped in the washing bath.
The filter and the main filter cannot be
dismantled as the cleaning arm constantly
cleans them.
N EVERTHELESS :
- Regularly clean the waste trap. To do this:
Fig. 14 ➀ ➀ Pull the waste trap handle upwards.
- Clean the drainage outlet (3 to 4 times per
annum). To do this:
Fig. 14 ➁ ➁ Remove the drainage outlet by
pushing the tab backwards, and then pulling
upwards.
- Remove residue using a brush.
- Clean under running water.
- Return the unit to its housing taking care that
it is well engaged.
Clean as necessary
• Underneath the filters, around the door and
the door joint with a damp sponge to remove
any deposit.
• Use only soap and water for the body and
control panel.
• Do not clean with abrasive powders, scouring
pads, spirit-based products or solvents.
Preferably use a cloth or a sponge.
• If you have a stainless steel door you may use
products adapted for stainless steel. See the
manufacturer’s instructions for advice on their
use.
We recommend using 3M Stainless Steel
Cleaner. Please phone our After Sales Service on
1 300 652 100 for the Store nearest you.
Every year
To maintain your machine in perfect working
order you should clean it once or twice a year.
Run on “Very dirty dishes” programme with the
machine empty and a special dishwasher
cleaning product available from any reputable
dealer.
Prolonged period of non-use
Clean your machine completely then unplug the
electricity supply and close the water tap.