beautypg.com

Additional functions – Kleenmaid DW39X User Manual

Page 16

background image

en

16

Terminating the programme
(Reset)

Only when the main switch is on:
Rotate programme selector to the
Reset position.
The programme sequence lasts
approx. 1 min.
When the programme has run,
switch off the main switch

1

.

To restart, rotate the programme selector

3

to the required programme. Switch on

the main switch

1

. The programme

sequence starts automatically.

Changing the programme

It is possible to change the programme

within 2 minutes after you have switched

the dishwasher on.

Should it be necessary to change the

programme after this period, the

programme cycle that has already been

begun (e.g. washing) will be completed

first of all.

Note

If the power supply is
disconnected while the appliance
is operating, e.g. by switching off
the appliance or due to a power
failure, all settings remain stored.
Operation continues automatically
as soon as the power supply is
restored.

Additional functions *

*

on some models additional functions

4

can be set with the buttons.

Pre-Soak *

The Pre-Soak programme option serves to
perform a pre-soak cycle before the main
programme. This cycle enables cookware,
e.g. pans, bowls, etc. to be pre-soaked
and pre-rinsed in the lower rack. If you
wish to pre-soak the dishes, this
programme option must be selected by
pressing the “Pre-Soak” button before the
programme starts. The recommended
detergent amount is approx. 5 g poured
onto the inside of the door.

Time reduction/ time saving *

Pressing the “Time reduction/time saving”
button provides a short wash cycle by
curtailing the drying phase and the
washing time. The washing and drying
performance will be reduced with the Time
reduction/time saving programme option.

Half load*

If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“Half load”. The “half load” additional
function saves water, energy and time. It is
recommended to put a little less detergent
in the detergent dispenser than for a full
load.

Extra dry*

If you press the “Extra dry” button, you
will receive a higher temperature in all
programmes in the final rinse and
therefore an improved drying result.
(please note that higher temperatures
might have an effect on delicate items).