Kleenmaid OMF6020 - Manual (Page 10)

10
Automatic functioning (with delayed cooking start)
Press the
OK symbol until the flashing
appears, set the desired cooking time
(with ). Using OK again, go to the flashing symbol and set the desired
cooking end time. The
symbol switches off after a few seconds, the time
will re-appear and the symbol switches on. Now turn the two knobs to the
desired temperature and cooking function. The oven remains off and will activate
automatically, the
symbol lights up to show that a program is set.
When the cooking end time is reached the symbols starts to flash, the oven
switches off and the acoustic signal warns that cooking has ended. Turn both
knobs to the off position. Touch any symbol to cancel the acoustic signal. Press
OK again to exit programming mode. If no action is taken, the acoustic signal is
cancelled automatically after about 6 min. A program can be modified at any time
be varying the set times. Programming can be cancelled by taking the cooking end
time to
0:00 Example: it is 11:30, the cooking time necessary is 30 minutes and
cooking is set to end at 13:00. The oven will switch on at 12:30 and switch off at
13:00.
Timer function (minute minder)
Press repeatedly on the
OK symbol until the flashing
symbol appears with
0:00 (min:sec). By pressing the or symbols, set the desired time (up to a
maximum of 99 min). After a few seconds the programmer will start to count down
on the display. The time set can be modified directly at all times by pressing the
symbols. When the set time is reached the symbol starts to flash and
the acoustic signal begins. Touch any button to stop the acoustic signal. After a
few seconds the clock will re-appear and the
symbol switches off. Set the
timer to 0:00 to cancel this function. This function can be used during manual
cooking.
Acoustic signal (beeper)
The acoustic signal continues at the end of a program for about 6 minutes. To
interrupt it touch any one of the buttons
OK . The loudness of the signal
can be set to three different sound levels in the following way: press OK until the
letter L appears followed by the level currently set (from L1 to L3). Touch the
or ] symbols to set the desired level. The previous screen returns after a few
seconds.
Deleting the program
To delete a program, take the duration of this program to
0:00. The programmer
will return to the manual setting ready for manual cooking or setting a new
program.
Safety for children or against accidental operation
It is an additional function that allows to block access to the functionality of the
electronic programmer keys both when the oven is running and as prevention with
the oven is off. To activate this function, press the
button for about 5 seconds,
(the
symbol is activated). This prevents children or others from accidentally
operating the programmer or starting the oven. De-activate the lock in the same
way. Acoustic signals can still be cancelled in the normal way even while the lock
is active. If attempts are made to otherwise use the programmer with the lock
activated, two warning beeps are emitted and the lock symbol flashes several
times to warn that the lock is activated.
ATTENTION: in manual cooking mode ( ) activation of the lock does not
allow the oven or the timer functions to be used. The lock must be deactivated tio
change an active program. It remains active even after a power-cut during which
programmer is powered off. When power is restored, de-activate the lock before
attempting to use the programmer.
Symbols
Clock
Timer
Oven active
Cooking time
Cooking end time
Number decrease
Number increase
Automatic
Manual
Safety lock