Kleenmaid OMF6010 - Manual (Page 9)

9
Minute counter
Fig. 2
As this minute counter does not control the oven, when it
finishes counting the oven will continue to work.
To set, press the central button for 3 seconds until
appears (figure 2). Press “+” and “-” to set the required
time.
To set the minute counter at a later stage, press the
central button for 3 seconds and adjust as described
above.
The minute counter beeps when it finishes counting. To
disable it, press any button.
Cooking time
Fig. 3
This is a semi-automatic cooking function. It can be used
to set cooking times.
Press the central button for 3 seconds. Then press it
again until “dur” appears (figure 3). Press “+” and “-” to
set the required cooking time.
End of cooking time
Fig. 4
The end of cooking time can also be set.
Press the central button for 3 seconds. Press the central
button twice consecutively and wait for “End” to appear
(figure 4). Press “+” and “-” to set the required end of
cooking time.
The oven will work in the set mode and at the set
temperature until the end of cooking time.
Timer touch control
Setting the clock
Fig. 1
“Auto” and “0:00” will start flashing when the unit is
switched on for the first time. To set the clock, press the
central button for about 3 seconds. When appears,
press “+” or “-“ to set the correct time.
Wait until a beep tells you that the clock has been set
(figure 1).
To set the time at a later stage, press “+” and “-” together
for 3 seconds and then adjust the clock as described
above.