Kleenmaid KWD140 - Manual (Page 3)

2
Important information
Read this instruction manual carefully. This will enable
you to operate your appliance safely.
Please keep the instruction and installation manual in
a safe place. Please pass on the instruction manual to
the new owner if you sell the appliance.
This appliance is intended only for domestic use.
Please observe the installation manual enclosed.
Check the appliance after unpacking it. Do not
connect the appliance if it has been damaged in
transport.
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket. The
mains voltage must correspond to the voltage
specified on the rating plate.
The sockets must only be installed and the
connecting cable replaced by a qualified electrician. If
the plug is no longer accessible following installation,
an all pin disconnecting device must be present on
the installation side with a contact gap of at least
3 mm.
Adapters, multiway strips and extension leads must
not be used. Overloading can result in a risk of fire.
Before installation
Transport damage
Electrical connection