Self-cleaning panels control panel, Use of minute minder, Servicing installation – Kleenmaid TO20 User Manual
Page 3: Function- oven

SELF-CLEANING PANELS
CONTROL PANEL
4
5
Using the OVEN FUNCTION SELECTR KNOB, the followuing functions are
available:
NORMAL OVEN - traditional cooking with top and botton element.
Select temperature required on thermostat. When temperature is
reached the yellow light will go out and then begin to alternate between
lit and unlit as the temperature is controlled.
Allows full power BOTTOM ELEMENT ONLY
Allows full power TOP ELEMENT ONLY
FULL GRILLING (open door and place grill deflector in place).
USE OF MINUTE MINDER
To use the minute minder turn the knob clockwise to the chosen position. A
ringing buzzer will advise when the time has elapsed.
1. Selector switch -
Provides for various cooking options
2. Yellow indicator light - indicates elements are energised - will turn off when
temperature is reached, then on again each time the thermostat indicates more
heat is needed.
3. Red indicator light - indicates a fuction has been selected
4. Clock -
Allows normal count down timer
Self Cleaning Panels (P/N SPA 2) may be purchased as an optional extra for the
multi-function oven. Refer to Page 6 for details.
SERVICING
INSTALLATION
IMPORTANT: Eslectrical connections must only be performed by a licensed
electrical contractor. For service and repairs, contact your local Kleenmaid
retailer, or a Kleenmaid State office - see BACK PAGE for details.
For installation details, see instructions on Page 4.
FUNCTION- OVEN
1
2/3
4
4
1
2/3
15
30
45
250
200
150
100
75