Kleenmaid OCCCNR - Manual (Page 8)

We recommend that you minimise the exposure of the Corner
Unit to the elements.
High moisture content in the air (rain, mist, salt spray etc.)
can affect metal components and lead to material breakdown. If
left in an area subjected to high moisture content, we strongly
recommend that you observe the cleaning procedure on a regular
basis and cover the appliance whilst not in use.
Material breakdown from high moisture conditions can be
avoided if the appliance is well protected from the weather and
regular cleaning is performed.
STORAGE
Proper care and maintenance will keep your Corner Unit in top
operating condition and prolong its life. Follow these cleaning
procedures on a timely basis and your Corner Unit will stay clean
and operate with minimum effort.
CLEANING AND MAINTENANCE
Before initial use and periodically thereafter we suggest you wash
your Corner Unit using a mild soap and warm water solution. You
can use a wash cloth or sponge for this process. Do not use a
stiff wire or brass brush. These will scratch stainless steel and
chip painted surfaces
(varies by model) during the cleaning
process.
CLEANING EXTERIOR SURFACES
Stainless steel over time will be affected by ‘tea staining’ (the
brown discolouration of some stainless steel).
Tea staining can be reduced by washing the surface with
mild detergent and warm water and then rinsing with clean cold
water. We recommend the surface be wiped dry with a clean cloth.
CARE FOR STAINLESS STEEL
IN COASTAL AREAS, FREQUENT
CLEANING AND THE USE OF A COVER
IS RECOMMENDED TO PROLONG THE
LIFE OF THE APPLIANCE.
SALTY AIR WILL ADVERSELY AFFECT
EXPOSED PARTS.
DO NOT USE OVEN CLEANER TO CLEAN
THE CORNER UNIT.
SOME PROPRIETORY BARBECUE
CLEANERS MAY AFFECT / DAMAGE
SOME OF THE SURFACE COATINGS
USED ON THIS APPLIANCE.
READ THE CLEANER INSTRUCTIONS
CAREFULLY.
IT IS RECOMMENDED TO TEST FIRST IN
AN INCONSPICUOUS PLACE.
GENERALLY WE RECOMMEND ONLY
WARM SOAPY WATER FOR CLEANING
THIS APPLIANCE.
M A I N T E N A N C E 8 8