Kleenmaid OCCSC - Manual (Page 3)

Before attempting to assemble this appliance, check that all the
necessary parts have been included using the parts list opposite.
Inspect parts as you proceed.
Contact your place of purchase for assistance regarding
replacement of any damaged or missing parts. Supplier contact
details are on the back cover of the instruction manual.
Do not assemble or operate an appliance that appears
damaged.
CHECK FOR ANY DAMAGE
P R E - A S S E M B L Y
While it is possible for one person to assemble the Sink /
Workstation, we recommend asking for the assistance of another
person when manoeuvring some of the larger and heavier pieces.
GENERAL
Standard Phillips-head screwdriver.
TOOLS YOU WILL NEED
1. Flatten cardboard packaging and use this as a protective
work surface to assemble upon.
2. Some protective coating may need to be removed from
components prior to assembly.
3. Unless specified otherwise, do not tighten screws and nuts
until trolley is fully assembled.
4. Pre-screwing of connection points for securing the side
shelves will assist in securing shelves smoothly.
ASSEMBLY TIPS Description Qty
Trolley side panel – right 1
Trolley side panel – left 1
Trolley rear panel 1
Castor seat – lower rear, lower front, right rear, right front 4
Castors 4
Bottom shelf 1
Trolley bracket – front 1
Doors 2
Sink / Workstation body assembly 1
Cutting board 1
Tap 1
Drain assembly 1
Drain hose 1
Hardware pack 1
Door bracket – upper right, upper left 2
CARTON CONTENTS
G E N E R A L I N F O R M A T I O N 3 3
Purchased from
Date purchased
Serial No.
NOTE: Sales docket must be kept as proof of purchase date.
FOR CUSTOMER REFERENCE
(Record and file in a safe place)
General Information 3
Pre-Assembly 3
Assembly 4-7
Maintenance 8
Parts Diagram / List 9-10
TABLE OF CONTENTS