Kleenmaid ICK63 - Manual (Page 10)

EN
10
2 2 / USING YOUR APPLIANCE
POWERING ON
Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a bip
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.
STOP
Press the start/stop button for the cooking
zone used or the power "
-- " button until 0 0 is
displayed.
ADJUSTING THE POWER
Press the + or - power buttons. During opera-
tion, you can set the power level to “12”
directly by pressing the “—
—” button
Pre-selected power levels:
Button Low-heat (6 6)
Button High-heat (1 10 0)
Button Boost
boiling
• •
• •
DESCRIPTION OF THE CONTROL
PANEL • •
Start/stop touch control.
Power - + touch controls.
Power - + touch controls.
A
B
C
Tip
For simultaneous use, favour the use
of cooking zones located on opposite
sides of the hob.
On the same side, the use of a cooking
zone at maximum power results in an auto-
matic limitation of the other cooking zone
on that side, which is indicated in the power
level display.
MeM o Max
A B C
SETTING THE TIMERS
Each cooking zone has its own timer. It can
be used as soon as the cooking zone is tur-
ned on.
To turn it on or change the timing, press the
“+“ or “-” buttons on the timer.
When setting longer cooking times, you can
get to 99 very quickly by pressing the “-” but-
ton straight away.
When the cooking is finished, “0” is displayed
and a beep sounds. To cancel this informa-
tion, press any button for the particular coo-
king zone being used. Otherwise, the infor-
mation will disappear after a few moments.
To stop the timer manually, press “+” and “-”
at the same time or return to 0 using the
“-” button.
• •