Cleaning – Kleenmaid CH16 User Manual
Page 6
4
IMPORTANT: If the vitroceramic surface breaks or you notice cracks in it, disconnect the
equipment. Call Kleenmaid Customer Call Centre for service assistance.
CLEANING
Clean the vitroceramic surface
frequently, when it is cool. Never use
abrasive products or pads. Clean
with a damp cloth and soapy water.
Once a week, clean thoroughly with
specific products that preserve and
protect vitroceramic hobs. Scrape off
hard stuck dirt with the scraper
(Included in accessory bag).
If sugar (or sugary matter) or plastic
is accidentally burnt on the hob,
remove at once with the scraper
while still hot. Otherwise the spill
may leave a permanent mark.
Do not use the hob as a work surface.
Be particulary careful with dirt like
soil or dust from vegetables, cleaning
powders, etc. which may scratch the
surface when pans are placed over it.
IMMEDIATELY
SOAP + WATER
SCOURER