Kleenmaid CH600CM - Manual (Page 6)

FOR THE INST FOR THE INST ALLER ALLER
INSTALLATION INTO THE WORKTOP
All our cooking hobs are designed to be fit-
ted into worktops, whether made of wood or
laminated plastic, provided it is of a heat resi-
stant surface. For building in it is sufficient to
make a hole in the worktop as shown in Fig.5
(560mm x 490) keeping a minimum distance
of 40/50 mm from the rear wall to avoid
damage by heat.
If a horizontal partition is fitted underneath
the hob, it should be located at a minimum
distance of 90 mm from the top of the work
surface.
Mount the two brackets on the front and on
the rear side of the cut out. Take care, that
the brackets are mouted symmetrically (see
Fig 5 and 6).
Finally click-in the appliance in the cut out.
(see Fig 7)
6
DB00703-00-1
490
R MAX = 10
560
DB00704-00-1
R
MAX = 10
Fig. 5
Fig. 6
Fig. 7