Kleenmaid CMBT01N - Manual (Page 8)

7
TROUBLESHOOTING ………………………………….… ……
Problem Solution
On/Off Switch not on Check plug, main switch and fuses
No coffee dispensed Make sure the capsule is properly positioned, capsule slot not
obstructed, brewing chamber cover properly closed, water tank full and
properly placed. Perform the priming procedure by turning
Coffee/Steam selection knob to the off position, wait a few seconds,
then turn it clockwise back to the Coffee position. Repeat if necessary.
Coffee not hot enough Preheat cup (hot water without capsule), descale if necessary.
No hot water/steam Remove steam nozzle and clean, descale if necessary.
Milk does not froth Check the Coffee/Steam selection knob position, and clean the steam
dispenser if necessary.
Milk for cappuccino not
frothy enough Dismantle the steam nozzle and clean all its parts. Use only cold,
whole milk.
Noisy pump Make sure the water tank is full and properly placed.
Capsule area leaking
(water in capsule
container) Position capsule correctly. If leakage persists, contact the retailer or
supplier of the machine.
CLEANING AND MAINTENANCE …………………… …….….
1. System Cleaning
To refresh the inside parts of the system, you can choose to repeat the procedure of coffee
brewing several times and meantime try to brush the inside brewing chamber capsule holder with a
soft brush between different times. Clean the casing with a soft damp cloth. The water tank, drip
tray and used capsule collection container can be hand-washed only in warm soapy water then
rinsed thoroughly. The coffee/beverage outlet can be removed for cleaning by rotating the vertical
mark to the left. It may be placed in a secure place in the upper basket of a dishwasher. The outlet
is re-installed by following the reverse procedure to removal.
Note: Before attempting to clean the appliance, remove the plug from the power outlet. Do not
immerse the machine or its power cable in water or other liquids. Allow the machine to cool before
starting the cleaning procedure.
2. Descaling
When indicated by “TROUBLESHOOTING” above, obtain a commercial decalcifier/descaler
product and apply according to its accompanying instructions. After de-scaling is complete the
dispensed de-scaling liquid should be discarded appropriately, and the machine flushed with
drinking water prior to re-use.