Kleenmaid CM03X User Manual

Page 13

1 3

I C T- 0 9

COFFEE TEMPERATURE

Press the key

and the display panel shows:

Using the keys

you can change and set the temperature of

the coffee. The scale of variation ranges from 14° to +50° F (from -10 °C
to +10 °C). The 0 position corresponds to the optimal factory setting.

HOT WATER TEMPERATURE

Press the key

and the display panel shows:

Using the keys

you can change and set the temperature

of the hot water. The scale of variation ranges from 14° to +50° F (from
-10 °C to +10 °C). The 0 position corresponds to the optimal factory
setting.

STEAM TEMPERATURE

Press the key

and the display panel shows:

Using the keys

you can change and set the temperature

of the steam. The scale of variation ranges 14° to +50° F (from -10
°C to +10 °C). The 0 position corresponds to the optimal factory
setting.

Press the key

to exit the programming function.

SETTING THE GRIND

A number of factors help you to understand whether the grinding
level needs to be adjusted:
• If the coffee is dispensed too quickly, this means that the beans

have been ground too coarsely.

• If the coffee comes out in slow drips, this means that the beans

have been ground too ﬁnely. A very important factor for ensuring
a good coffee is the right setting for the grinding level, which is
factory-set but can also be modiﬁed as follows:

• Open the machine.
• Carefully turn the dial located on the left side of the machine “A”

(Fig.5).

Turning the dial clockwise produces a ﬁner grind; turning it anti-
clockwise produces a coarser grind.

Note: Turn the dial min. 3 complete turns, clockwise or anti-clockwise,
to obtain a change in the degree of grinding, ﬁner or coarser.

IMPORTANT !! After setting the new grind, it is necessary to
dispense at least 2 coffees.

SELECTING THE TYPE OF ESPRESSO

TEMPERATURE

COFFEE +00

Using the key

you can select from among the following

types of espresso dose:

SHORT
MEDIUM
LONG

ADJUSTING THE ESPRESSO DOSE

To change and memorize the quantity of coffee, proceed as follows:
• During the infusion, press and hold the key

until the desired

quantity (coffee dose) is reached.
The display shows the message “MEMO ?”

If you want to memorize the dosage of coffee just made, proceed
as follows:

• To memorize, as soon as the infusion is ﬁnished, use the key

to select the type of coffee (short, medium, or long) on

which to memorise the new setting.

• Press and hold the key

again until you hear the beep

of conﬁrmation.

Now the new quantity of coffee is memorized and associated with
the type of coffee selected.

SETTING 1 OR 2 COFFEES

With this machine you can prepare a single coffee or 2 coffees
simultaneously.
Make your selection using the key

COFFEE

1 SHORT

WATER

MEMO ?

Fig. 5

CM03X_U&C_ICT-0…- KLEENMAID.pdf 16/6/08 11:08:06 AM

TEMPERATURE

WATER +00

TEMPERATURE

STEAM +00

CM03X_U&C_JULY08.pdf 26/6/08 9:09:35 AM

CM03X_U&C_JULY08.pdf 9/7/08 10:59:30 AM