Installation – Kemppi 5000 Master User Manual
Page 4

4 – Master 5000/0227
44
©
COPYRIGHT
KEMPPI
OY
P21
P22
P23
R22
S21
R21
P21 Current meter
P22 Voltage meter
P23 Display for adjustment value of MMA welding dynamics -9..0...9
R21 Ajustment of welding current
R22 Adjustment of MMA welding dynamics
S21 Selection for local/remote control
Do not use faulty welding cables. Isolate yourself by using dry and not worn out protective
clothes. Do not weld on wet ground. Do not place the welding cables on the power source or
other electricial equipment.
Watch the welding fumes!
Ensure that there is suffi cient ventilation. Follow special safety measures when you weld metals
which contain lead, cadmium, zinc, mercury and beryllium.
Note the danger caused by special welding jobs!
Watch the fi re and explosion danger when welding container type work pieces.
2. INSTALLATION
2.1. INSTALLATION
- FastCool 10 (12 pages)
- ArcFeed 300P (20 pages)
- KempCool 10 (12 pages)
- KempCool 40 (14 pages)
- KempactCool 10 (24 pages)
- Procool 10 (11 pages)
- Procool 30 (9 pages)
- KMS 500 (16 pages)
- KM 500 (18 pages)
- MSF 57 (32 pages)
- MF 33 (16 pages)
- MF 29 (18 pages)
- KMS 400 MVU (16 pages)
- FastMig Pulse 450 (30 pages)
- MXF 67 (36 pages)
- GT02SW (18 pages)
- FastMig MS 300 (22 pages)
- SF 54 (14 pages)
- KMS 400 AS (18 pages)
- KM 400 MVU (18 pages)
- MXP 38 (30 pages)
- FastMig X 450 (32 pages)
- FastMig 520 (16 pages)
- MR 300 (14 pages)
- M 420MV (16 pages)
- AS (10 pages)
- Evo 300 (20 pages)
- RA (38 pages)
- Pulse 2800 (17 pages)
- Pulse 3000 MVU (24 pages)
- MIG 2520 (12 pages)
- MIG 2530 (16 pages)
- DT 400 (34 pages)
- ARC800 (16 pages)
- Pulse TCS (38 pages)
- KempArc DT400 (28 pages)
- Kempomat 2100 (14 pages)
- Kempomat 4200 (26 pages)
- Promig 100 (19 pages)
- ProMXE Automotive panel (20 pages)
- Pro Evolution 4200 (17 pages)
- Promig 300 (22 pages)
- Protig 410 (28 pages)
- Protig 511 (37 pages)
- Promig 200 ML (18 pages)