Kemppi Kempomat 1701 - Manual (Page 3)

© KEMPPI OY KEMPOMAT 1701, KEMPOMAT 2100 / 0531 – 3
A
J
I
E
D
C
B
H
F
G
K
A
1. PREFACE
1.1. Introduction
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual is
arranged to give you a good understanding of the equipment and its safe operation. It also con-
tains maintenance information and technical specifications. Read this manual from front to back
before installing, operating or maintaining the equipment for the first time. For further informa-
tion on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2. Product introduction
Kempomat is a welding machine with integrated welding current supply and wire feeder. The
power supply converts the mains voltage suitable for welding. The wire feeding mechanism
feeds wire from a roll through the welding gun nozzle into the arc. A weld is made by moving
the welding gun.
1.3. Main components
A Housing
B Door plate
C Handle
D Earth cable socket
E Gun connector
F Polarity selector
G Switches and controls
H Wire feed mechanism
I Feed roll latch
J Roll brake control
K Gas bottle holder
This equipment’s electromagnetic compatibility (EMC) is designed for use in an industrial
environment. Class A equipment is not intended for use in residential location where the
electrical power is provided by the public low-voltage supply system.