Kawai CN35 MIDI Manual - Manual (Page 3)

3
CN35 MIDI Settings Manual
MIDI Settings
MIDI Channel
The MIDI Channel setting allows the transmit/receive channel to be specified. The selected channel will function as
both the transmit and receive channel (separate transmit/receive channels cannot be specified).
1. Selecting the MIDI Channel setting
After entering the MIDI Settings menu (page 2):
The MIDI Channel setting will be selected automatically.
2. Changing the MIDI Channel value
Press the  or  VALUE buttons to decrease or increase the
value of the MIDI Channel setting.
* The MIDI Channel setting can be adjusted within the range of 1 - 16.
* Any changes made to the MIDI Channel setting will remain until the
power is turned off.
* Preferred MIDI Channel settings can be stored to a Registration
memory for convenient recall. Please refer to CN35 Owner’s Manual
page 34 for more information.
3. Exiting the MIDI Channel setting
Press the  and  MENU buttons simultaneously to exit the
MIDI Channel setting and return to the main settings menu.
 Omni mode
When the CN35 digital piano is turned on, the instrument is automatically set to ‘omni mode on’, allowing MIDI information to be
received on all MIDI channels (1-16). When the MIDI Channel setting is used to specify a transmit/receive channel, the instrument
will be set to ‘omni mode off’.
 Multi-timbral mode and Split/Dual mode
Using Split mode with Multi-timbral mode enabled
Notes played in the lower section of the keyboard will be
transmitted on the channel that is 1 channel higher than the
specified channel. For example, if the MIDI channel is set to
3, notes played in the lower section of the keyboard will be
transmitted on channel 4.
Using Dual mode with Multi-timbral mode enabled
Notes played will be transmitted on two channels: the
specified channel and the channel that is 1 channel higher.
For example, if the MIDI channel is set to 3, notes played on
the keyboard will be transmitted on channels 3 and 4.
* If the specified MIDI channel is 16, the lower section / layered part will be transmitted on channel 1.
4-1 MIDI Channel
= 1
4-1 MIDI Channel
= 5
4-1 MIDI Channel
= 1